Hammered effect dangling heart earrings - Handcrafted

Made by :Lucie T Perles&Co
Published on the :31/01/2024
Time :0 minutes
Level :Advanced
Prices :€14.20

Video - Hammered effect dangling heart earrings - Handcrafted

How to make earrings by hand?

If you've always been tempted by the idea of creating your own costume jewelry using classic methods, but never dared to take the plunge, our heart earrings tutorial is the perfect starting point!

This step-by-step video guides you through essential jewelry-making techniques:
from meticulous cutting to polishing and soldering. You'll discover the art of hammering metal, faithfully reproducing a template on a brass plate, precision sawing with a bocfil, drilling metal, or even soldering a shank to create perfect ear studs.

As with all the techniques we show you, don't forget to protect yourself with gloves, a smock, a mask... and watch your fingers!

We're all about safety: remember to protect yourself with gloves, gown and mask, and watch your fingers when handling the tools.

Our YouTube channel is packed with detailed tutorials, varied techniques and practical tips to help you master traditional jewelry-making as a self-taught artist. Be inspired by our DIY projects and embark on a creative adventure to bring your unique, personalized jewelry ideas to life. It's up to you to shine!

Tutorial steps

Step 1

Draw several small hearts on a sheet of paper and cut them out. Test the size directly on your ear to see if it's right for you.

Transfer the hearts to the brass plate. Try to optimize the plate as much as possible.

Cut out the three hearts with a bocfil.

Step 2

Once cut, rework the edges with the file. Then hammer the surface.

Step 3

Once you've hammered your three little hearts, move on to grinding and polishing the back.

Then give the three hearts a satin-matt finish with the Matte Brush.

Step 4

Put the three hearts back together, then flatten them so that they are straight.

Step 5

Before soldering the cores together, make marks with a marker on the back where you want to solder.

Step 6

Cut out small pebbles. Apply borax to the metal plates, then heat a little to plate the metal.

Position small pebbles using a tweezer, then braze until the pebbles melt. Heat the whole piece thoroughly.

Leave to rest, then put to dry. It's very important to have a hood with the deroché.

Step 7

We'll now weld the rod to the back of the part.

Make a pre-hole, position the rod, apply a little borax, then position the straw at the base of the rod. Heat the whole part, then concentrate on the rod. Once the braze is poured, stop.

Leave to cool on a jeweler's heap, then put in the déroché.

Step 8

Once out of the drip tray, brush over again.

Gently smooth the edges with a small file, especially the tips of the hearts.

Result
Schema  Hammered effect dangling heart earrings - Handcrafted
Schema  Hammered effect dangling heart earrings - Handcrafted
 Lucie T Perles&Co - Lucie T Perles&Co
Hello ! Moi c'est Lucie, je suis responsable du catalogue chez Perles&Co. Je suis bijoutière de métier mais surtout une grande passionnée des loisirs créatifs ! Je touche à tout : bijoux, tricot, macramé, broderie, punch needle.... J'adore découvrir de nouvelles techniques et de nouveaux produits !
Associated keywords
Evènements
Matières
Couleurs / Effets
Niveau de réalisation
Pour qui ?
Share with my friends
Which material to use ?
Supplies
925 Sterling Silver Ear clutches 3.8x4.6 mm x10
€3.60
Brass plate 100x100 mm - thickness 0.8 mm - Brass x1
€6.40
13x0.7mm 925 Sterling Silver Earring Posts x10
€4.20
Subtotal : €14.20
Please note that the quantities of the suggested equivalents are not necessarily exact. You can adjust them in your basket.
Tools
Silver smith Hammer
OUTIL-475
Qty : 1
63 in stock
€5.90
Gas blowtorch DREMEL® VersaFlame
OUT-388
Qty : 1
32 in stock
€57.00
Brazing for soldering in plate Ag High  n°1 - 741°-788° x3g
€11.90
Bloc in steel 6.4x6.4 cm x1
TOOL-635
Qty : 1
25 in stock
€13.00
DREMEL® Pen + 2050-15 - Precision tool with 15 accessories x1
€61.00
13.5x9cm Ceramic honeycomb welding plate for jewellery making x1
€16.60
17cm Straight Jeweller's Shears for cutting metal x1
€8.70
15cm Plotter tip - Carbide tip pen x1
ATT-193
Qty : 1
96 in stock
€4.00
24mm Circular buffing brush in cotton thread x1
€2.40
DREMEL® : Cleaning and polishing set (684) x20
€19.00
3P Picking Powder for Silver and Gold x1kg
€25.00
22x3.5mm Cotton Circular buffing brush x1
€2.40
27cm Borax brush n°12 with wooden handle x1
€2.90
250x20x6.5mm - P400 - Flat emery stick - Red x1
€5.00
250x20x6.5mm - P800 - Flat emery stick - Grey x1
€5.00
Flat emery wheel 245x18.2x5.6 mm - P1200 - Blue x1
€5.00
22cm copper tweezers x1
ATT-600
Qty : 1
59 in stock
€8.40
12cm Precision tweezers by Perles&Co x1
ATT-601
Qty : 1
102 in stock
€3.50
68mm Third hand on base for cross-over tweezers - Black x1
€7.00
45mm Wooden mallet barrel shape x1
ATT-636
Qty : 1
62 in stock
€5.30
Piercing saw blades for bocfil n°3/0 x144
ATT-645
Qty : 1
Only 4 in stock
€10.50
Polishing paste Lustre Bar x 450gr
ATT-790
Qty : 1
79 in stock
€17.90
12cm Jeweller's steel bocfil - depth - rounded shape - Black x1
€24.50
200x16mm Flat knife file - medium grit - jewellery tools x1
€18.00
Ready-to-use Soldering water for jewelery - Yellow x1L
€12.60
Typing block - Rubber heap - 10 x10 cm x 1
€6.20
20mm steel brush - fine grit 0.3mm x1
HRA-091
Qty : 1
78 in stock
€14.20
17x3.5mm Felt round cutter x1
HRA-338
Qty : 1
22 in stock
€2.00
23x4mm Circular cotton polishing brush x1
€2.00
Subtotal : €409.90
Equivalent product
Soldering tool kit for beginners Exclusive to Perles&Co x1
€25.00
Jewellery Beginner Tool set x1
ATT-652
Qty : 1
23 in stock
€60.80
Questions (2)

You have a question about this tutorial? Ask it to our team and the people who have already tested it. The Perles & Co community is here to help you!

By Mule (26/07/2026 15:47:20)
Bonjour ! Pourquoi deux dérochés? Ne peut-on pas braser les coeurs et la tige puis faire un seul déroché? Merci beaucoup :-)
Translate the question
Please log in to use this feature
Our Lucie expert answers you (27/07/2026 09:02:32)
Bonjour, techniquement il est possible de tout braser en une seule fois, mais dans ce tuto nous avons fait le choix de procéder en deux étapes. Les deux passages au déroché servent simplement à nettoyer le borax et l'oxydation après chaque étape de brasure. 
Translate the answer
By Pauline (14/12/2024 17:59:36)
Bonjour, est ce que si j'utilise une plaque de laiton, comme dans le tutoriel pour faire mes bijoux, ceux-ci peuvent aller dans l'eau sans rouilliez ou s'oxyder ?
Translate the question
Please log in to use this feature
Our Lucie T. expert answers you (16/12/2024 10:03:46)
Bonjour, les bijoux en laiton brut peuvent ternir et s’oxyder avec le temps, notamment au contact de l’eau, des parfums ou de l’humidité. Pour limiter ce phénomène et préserver leur éclat doré, voici quelques conseils :

Évitez de les exposer à l’eau autant que possible.
Rangez vos bijoux dans un endroit sec.
Manipulez-les le moins possible pour prévenir l’oxydation.
Si vos bijoux entrent en contact avec de l’eau, séchez-les immédiatement.

Pour nettoyer vos bijoux en laiton brut et leur redonner tout leur éclat, vous pouvez utiliser des chiffons de nettoyage spécifiques. Il existe également des astuces maison, comme le nettoyage avec du dentifrice, pour raviver leur brillance.
Translate the answer
Reviews (0)
Reviews are moderated before publication.
Please log in to use this feature

Credits

Perles & Co, Internet & E-Commerce company [31/01/2024] Any reproduction, representation, adaptation, in any form whatsoever, even partial, is prohibited, except for reproduction for private use not intended for collective use, representation in the family circle (art. L 122-5 CPI) and online publishing on condition that the source is mentioned and a link is included to the corresponding page of our site www.perlesandco.com.