This waterproof sanding sheet is the ideal tool for sanding your metal creations.
With its fine grain, it will also be useful for hand sandingfragile surfaces such as plastic substrates, lacquers and composite materials.
This emery paper can be used to smooth and remove roughness from your polymer clay creations.
Not sure which grit to choose?
The grit and roughness of sanding paper are defined according to a classification method.
The smaller the number, the coarser the grain.
- Between 150 and 240, it's for roughing.
- Between 240 and 600, for finishing.
- Between 800 and 2000, for advanced finishing.
In polymer, 1200 grit is the last sanding grit before moving on to polishing.
We start sanding polymer creations with 600 grit if there is a lot of material to remove. Otherwise, 800 grit is adequate.
To remove the slight whitish deposit caused by sanding, we then move on to polishing with even finer grit, found in the micro-mesh section.
Underwater use is recommended for polymer clay creations.
Tip: add a drop of soap to trap volatile sanding particles.
Find all our sanding and finishing tools.
New to the creative world of modeling and polymer clay?
Get started with our tips and tricks for creating with polymer clay.
Find all our polymer clay creation tutorials and our pro jewelry tutorials.
When sanding, take certain precautions: protect yourself with gloves and goggles, and work in a well-ventilated area. To avoid inhaling dust, which is harmful to health, it's also advisable to wear a fine dust mask.
Details:
Dimensions: 230x280 mm
Grain size: P1000
Waterproof
Flexible
Sold per 1 piece
