Stopper bead 3 mm with a 0.6 mm hole Gold Filled x2

Stopper bead made of a rubber washer hidded in a Gold Filled 14 carats bead of 3 mm diameter.
This stopper makes it possible to block beads on a bracelet, for example, it also helps to finish a bracelet with a cord without knotting.
Make a sliding bracelet without trendy knots quickly.
You will be able to remove it and to put it back easily.

The hole of the rubber washer is 1 mm.
You can therefore use it with cords of 0.5 mm diameter for example or several smaller diameter.

The gold-filled finish is a treatment widely used in the USA.
This is a 14 karat gold finish applied to a brass base.
The weight of gold corresponds to 1/20 of the total weight of the product, ie approximately 50 to 100 times more than in a gold-plated product.
Gold-filled jewelery has the appearance of gold jewelery for a much lower cost.
Much more resistant than a gold-plated classic, a gold-filled product will oxidize much less quickly.
If you still want to slow down the oxidation process, you should handle the Gold filled components with gloves and avoid contact with perfumes,
skin oils and lotions.
You should also keep them in a dry and temperate place.

Sold by bag of 2 pieces.