Create modern effects with this Kamenskaya Silver alcohol ink, designed to create a petri effect in your resin projects.
Silver is particularly effective for creating shimmering effects. This 15-ml fluid ink mixes quickly with the resin and can also be swirled with a toothpick to create more irregular patterns. For Petri effects, be sure to combine the translucent inks with a special white Petri paint and alternate the drops to draw the colors into the depth of the resin. Work on a flat, protected surface and ensure that the resin-hardener mixture is perfectly homogeneous. Since this formula contains alcohol, the use of a burner is not recommended.
What is the difference between a standard alcohol-based ink and a special Petri-effect alcohol-based ink?
Standard alcohol-based inks are used to color the resin and create marbled effects, color gradients, or swirling patterns. Kamenskaya special Petri-effect alcohol inks forresin, on the other hand, have been specially formulated with alcohol, pigments, and polymers to achieve the Petri Art technique. They allow you to create more intricate patterns, with colored filaments that sink into the resin and spread out deep within it.
Why use it with a special white Petri-effect ink?
The white ink plays an essential role in creating the Petri effect! Unlike conventional white ink, which is used simply for coloring, the special Petri white ink acts as a “sinker.” When applied after the drops of colored ink, it pulls them down to the bottom of the resin, creating branches, filaments, and stunning depth effects.
What can you do with this alcohol-based ink?
Create cabochons, graphic earrings, or small decorative objects combining silver, white, and black. A few touches of gold or silver metallic accents will make the composition more luminous. Our tutorial on resin cabochons with alcohol-based inks lets you explore this technique on small pieces. To choose the right material before you start, also check out our guide : UV or Epoxy Resin—Which Type Should You Choose?
Tips for use:
- Use a resin with a curing time of no more than 24 hours.
- Mix the resin thoroughly with the hardener to prevent defects in your finished piece; stir slowly to avoid trapping excess air bubbles inside.
- Pour the resin in a thin stream to minimize air bubbles within the resin layer.
- Work on a flat surface and cover it with a protective material to keep it secure.
- You can begin working once the bubbles rise to the surface and you’ve removed them.
- After each drop of color, use white. The white color blends with the colored paint, creating effects within the resin layer.
- Use only special white paint designed for marbling, with luminous, translucent shades. Only this paint has a composition that allows you to create marbling effects with these inks.
- Shake the paint jars regularly before applying each drop to ensure the mixture is uniform.
- Do not let the paint fall near the silicone edging, as this prevents it from sinking into the resin.
- If the resin is too runny, wait 20 to 30 minutes before starting to work with the paint. This will increase the viscosity, and the paint won’t sink too far to the bottom. The more runny the resin is, the more likely the paint is to sink to the bottom.
Both beginners and experienced creators can experiment with the concentration and layering of the drops. Our resources include tips and tricks for minimizing bubbles, choosing the right viscosity, and working safely.
Details:
Volume: 15 ml
Sold in 15 ml bottles
