Philodendron leaf earrings polymer clay and pastels

Step 1:
Put 2 sheets of golden Fimo polymer clay through a notched pastry machine.
Using a scalpel, cut 2 hearts of the same size from the sheet.
Remove 4 small triangles from each side of the hearts, then with a gouge, remove a filament of clay from the middle of your piece, followed by 4 ribs on each side.

Step 2:
Take 2 dry pastels of 2 different greens.
Scrape them to obtain powder.
Color your leaves, putting the dark green on the edges. Work with your finger to avoid the pastel getting into the veins of your leaves.
Turn your leaves over and color this side.

Step 3:
Take half a bar of orange Cernit polymer clay and machine-cut it wide.
Using the 11 mmdie, cut out 2 round shapes, then form 2 round beads.
Pierce the leaves at the top and the beads along the length.
Bake at 110°C for 30 minutes.

Step 4:
Leave your pieces to cool and varnish them with finishing lacquer.

Step 5:
Thread the orange bead and the small bronze bead onto the round-headed nail, then use round-tipped pliers to form a loop at the end. (Reminder: How to form a loop)
Pass an open ring through the hole in the leaf, and connect the elements. (Reminder: How to open a ring)

Here are some trendy DIY earrings!