Use this set of 20 flat waxed cotton wicks to cast and make personalized candles.
Conveniently, you can burn the candle from either side.
How to make a candle?
- Melt the desired quantity of wax.
- Cut the wicks if necessary (candle height + 10 cm). Make a double knot at 2 cm from one end, and slide it into the mold. Wrap your wick around a skewer or pencil to hold it over the mold before pouring the wax.
You can also insert the wick by making a hole in the mold with a needle.
- Next, carefully pour the liquid wax into a suitable candle mold and allow to cool. The cooling time is at least 3 hours, depending on the size and thickness of the mold.
- Leave to cool completely and remove from the mold.
If the wick does not shorten while burning, reduce it to approx. 1 cm.
Howto makescented candles Off the heat, add a special candle oil when the wax is liquid, then pour into your candle mold. Get inspired by our tutorial! Your original candle will look great on your living-room coffee table! Candle wax can be embellished with colorants or gemstones. Be sure to follow the manufacturer's instructions.
Please note that essential oils are not suitable for DIY candles.
Tip: Don't leave candles burning unattended.
If you wish to sell your candles on markets, please consult the regulations in force and the obligations concerning the sale of candles.
Details:
Length: approx. 20 cm
Width: approx. 2.5 mm
Sold in bags of 20.
