Long necklace pendant style dream catcher golden coral shell and mother of pearl

How to make an easy and fashionable necklace yourself?

At the time of writing, we are at the end of June and the first rays of sun are pointing the tip of their nose. And how do you say? We here at the office, we already see in a custom swimsuit, a mojito in hand, a beautiful hat (always customized) on the head, in playmette mode ... But, to be the most beautiful on the beach this summer, you need a little something more, the accessory that kills, the thing that makes bling without blah, the little ultra original and glamorous pendant that will attract the eyes where you need (ah ah, small technique, to take or to leave of course!).
Well here we get carried away a bit, you can of course wear this beautiful jumper on a small bohemian white dress or a cute little top, it works too!

Let's go we go, I'll explain how to do this DIY tutorial (Do It Yourself) ultra simple where you will need only jewelry clips :

1. Cut 20 cm of golden brass wire and wrap it on a part of your golden circle. It will prevent the rings from accumulating on the bottom of your circle in "heaps" mode not beautiful.
2. On a 10 cm rigid flat-headed nail, thread coral chips and create a loop using your rounded pliers. Open your loop as you open a ring to fix everything on your circle between two twists of brass wire.
3. With the help of the small rings, come and fix your golden sequin, your mother-of-pearl sequin, your cross, your oval charm and your end of epoxy chain to the biggest rings fixed themselves to your golden circle, always between the twists, at the location you like.
4. Do the same thing with your golden end of the chain , you can add a pearl golden tube with a flat nail if you like it ... or not! Or even both.
5. Hang your cowrie shell the same way, but I added a small piece of chain cut with my cutting pliers so that it falls a little lower between my two small rings.
6. Hang the small pearl coral drop in the same way, but use a triangle ring instead of the small ring (it does not fit otherwise!)
7. Hang the large coral branch pendant by passing a round head nail through its hole and then hanging a piece of warp at each end of the nail to which you will create ring loops thanks to your round clip .
   Attention, we here replaced for reasons of out of stock this pendant branch by another pendant like.
8. The tassels are all fixed, now let's attack the chain of suspension: attach a big ring on the clear part of your golden circle and place the central link of your end of chain about 10 cm.
9. Cut 2 pieces of chain of 11 ears each. Be careful when you cut it, you must be able to clear the holes that join a mesh to another.
10. On 4 round head nails, slide a coral faceted bead , cut your nail leaving 1 cm of rabe to create a ring loop.
11. Just attach 2 of these bead nails to the ends of the large link chain that you have already attached to your pendant.
12. Connect the free end of your bead nails to a triangle ring .
13. Attach your chain ends to the triangle ring on both sides using the holes in the chain that you have previously cleared.
14. Come fix the 2 remaining pearl nails
15. And to finish: fix at the free ends of these 2 nails, the necessary length of chain with big link, here 53 cm.

Your turn now ! Me and my jumper will drink a cocktail by the pool with a pretty white dress and wedge espadrilles ... olalala brightly this weekend huh?

NB: Attention, the list of products below is not completely in conformity with the picture of presentation. For stock reasons, some products in this tutorial have been replaced by equivalents.