Vintage gold necklace with pearlescent beads and emerald-green crystals for the holidays

Made by :Carla Perles & Co
Published on the :20/11/2026
Time :20 minutes
Level :Intermediate
Prices :€29.29
Vintage gold necklace with pearlescent beads and emerald-green crystals for the holidays
In summary

This emerald green and pearlescent necklace for the holidays combines PureCrystal crystal beads, Aurora pearlescent beads, and gold-plated stainless steel spacers. Three short pendants—featuring chains and bead charms—give it a vintage look, perfect for holiday dinners and parties. The necklace is assembled using jump rings and clasps and requires an intermediate skill level.

How do you make a vintage emerald-green necklace with pearl beads for the holidays?

Jewelry with vintage-inspired accents makes a comeback every winter on holiday tables, and this emerald-green and pearlescent-bead necklace for the holidays is right on trend. It combines subtle gold tones, pearly white beads, and a deep green on a structure of beads strung one by one. This step-by-step tutorial is intended for intermediate-level jewelry makers.

Here are the key points of the technique:

  • each bead is threaded onto a looping pin, then secured with a loop made using pliers;
  • round-headed pins hold a single bead, while flat-headed pins hold a pearlescent bead and a bicone;
  • a ring connects each loop, creating a small space between the beads;
  • Three 7-cm pieces of chain, combined with beads, form the pendants;
  • the Lobster Clasp and the closing ring are attached to chain extenders.

The main challenge lies in making the loops uniform. If you don’t have looping pliers, round-nose pliers will suffice for a handmade bead necklace. You’ll find stainless steel posts and clasps in our findings categories.

The 8 mm PureCrystal 5000 round beads and the 4 mm PureCrystal 5328 bicones offer the same quality of cut and brilliance as crystals from major brands. Here, they are shown in Emerald. The 8 mm Aurora 5810 pearlescent beads, in Crystal White Pearl, add a soft white hue. Discover them in the Aurora 5810 category.

The gold-plated stainless steel navette spacers feature a crystal cabochon.Stainless steel doesn’t tarnish, doesn’t rust, and is resistant to both water and sweat. It’s also suitable for sensitive skin and can be worn every day, not just for special occasions.

This vintage festive necklace is easy to customize. You can change the color of the crystals, switch to round beads in a different shade, or lengthen the pendants. With over 70, 000 items to choose from, simply browse the PureCrystal bead categories to select a different color palette.

Worn with a simple dress or a high neckline, it adds a touch of elegance to a Christmas dinner or a New Year’s Eve party. For more ideas, check out our selection of DIY crystal jewelry.

Once your creation is finished, share it on Instagram @perlesandco or on Facebook Perles & Co. The team loves seeing what the community creates.

Tutorial steps

Step 1
Vintage gold necklace with pearlescent beads and emerald-green crystals for the holidays : Step 1

Using a looping plier, slide a bead onto a round-headed pin and form a loop on the other side. You'll need at least 10 pearl beads and 6 emerald beads.

If you don’t have a looping plier, use our technical guide to make a loop with round-nose pliers.

Step 2
Vintage gold necklace with pearlescent beads and emerald-green crystals for the holidays : Step 2

Do the same with the flat-headed pins. Thread on a pearlescent bead, followed by an emerald-colored bicone. Make a loop to close the pin.

Step 3
Vintage gold necklace with pearlescent beads and emerald-green crystals for the holidays : Step 3

Next, start stringing the beads and spacers together, using a jump ring between each loop. You can also skip the jump rings and simply open the loops on the studs to connect them. But for this version, I preferred to use jump rings to create space between each bead.

Alternate one bead, one crystal bead, one bead, one crystal bead, one bead, a spacer, one bead, one crystal bead, one bead, a spacer, a bead, a crystal bead, a bead, a spacer, a bead, a crystal bead, a bead, a crystal bead, a bead.

Step 4
Vintage gold necklace with pearlescent beads and emerald-green crystals for the holidays : Step 4

Once you've strung your beads, cut 3 pieces of chain. Here, mine are 7 cm long.

Step 5
Vintage gold necklace with pearlescent beads and emerald-green crystals for the holidays : Step 5

Your bead structure is ready; you can start adding your beaded charms and chain pieces. To do this, you’ll need to open the loops after the pearl beads that surround the three Spacers. Slide the chain piece and a beaded charm into these loops. Do this for all three spacers.

Step 6
Vintage gold necklace with pearlescent beads and emerald-green crystals for the holidays : Step 6

This is what the necklace should look like once the chains and charms are assembled. The hardest part is over.

Step 7
Vintage gold necklace with pearlescent beads and emerald-green crystals for the holidays : Step 7

On each side of the necklace, if you need to make it longer, add beads or—like I did—pieces of chain using the rings. Attach the clasp to one piece of chain and the ring to the other.

Result
Schema  Vintage gold necklace with pearlescent beads and emerald-green crystals for the holidays
Schema  Vintage gold necklace with pearlescent beads and emerald-green crystals for the holidays
Carla Perles & Co
 Carla Perles & Co - Les tutos de Carla
Graphiste pour Perles & Co, j'aime également fabriquer des bijoux et vous proposez des tutos. J'adore les strass et les cœurs, donc ne soyez pas étonnés d'en voir souvent sur cette page !
Share with my friends
Which material to use ?
Supplies
PureCrystal 5328 Crystal Bicones 4mm Emerald x50
€5.40
Round bead PureCrystal 5000 8 mm - Emerald x1
€4.82
Lobster clasp 9 mm 304L gold-finished stainless steel x1
€0.80
2mm Stainless Steel 316L cable mesh chain - Gold Tone x50 cm
€3.00
30x0.6mm 304L stainless steel eye pins - Gold x10
€4.39
30x0.6mm 304L Stainless Steel Head Pins - Gold Tone x10
€2.20
8mm Aurora 5810 Pearls - Crystal White Pearl x10
€3.79
3x0.5mm 316L stainless steel Open jumprings - Gold x100
€1.90
Subtotal : €29.29
Questions (0)

You have a question about this tutorial? Ask it to our team and the people who have already tested it. The Perles & Co community is here to help you!

Reviews (0)
Reviews are moderated before publication.
Please log in to use this feature

Credits

Perles & Co, Internet & E-Commerce company [20/11/2026] Any reproduction, representation, adaptation, in any form whatsoever, even partial, is prohibited, except for reproduction for private use not intended for collective use, representation in the family circle (art. L 122-5 CPI) and online publishing on condition that the source is mentioned and a link is included to the corresponding page of our site www.perlesandco.com.