Earrrings marble effect in polymer clay

To complete this tutorial, you must first follow the step-by-step instructions in the technical file to learn how to create a white marble effect in polymer clay.

Step 1:
Cut one or more slices from the imitation marble block and place them on a thin sheet of white polymer clay.
Roll to expel air, or pass your plate through the widest notch of the dough machine.

Step 2:
Using a knife, cut out 2 rectangles 1.5cm wide by 3.5cm long.
Bake at 110 degrees for 30 min.
Hole your rectangles at the top and bottom with your hand chuck .
Sand your rectangles with 1000-grit abrasive under soapy water, then go on to polishing with micro-mesh.

Step 3:
Thread a large ring through each pompom, connecting it to the rectangle (to help you: how do I open an open ring?).
Thread the black bead onto the round-headed nail and form a loop on the other side. (To help you: How do I form a loop on a nail? You can also use special loop-forming pliers).
Attach a small ring to one side and hook it onto the larger ring, which must now be passed through the hole at the top of the rectangle.
Connect the earring support to the stem with the bead.

We love to see what you can do with the tutorials on Perles & Co, so don't hesitate to send us photos of your creations on our Facebook page.