White ceramic powder for molding - Raysin 200.
This air-drying powder is odorless and neutral. Latex, rubber and plastic molds work well with this ceramic powder.
Easy to use, with a beautiful white finish, your creations won't need repainting once dry.
However, if you wish to paint your creation, we recommend using DecoArt paint.
This Raysin 200 powder can also be used to create a candle container. You'll need to apply a protective varnish to allow your candles to burn without risk. Once dry, this varnish remains stable up to 60°C.
Details:
Preparation time: 10 min
Curing time: 3h30 min
Hardness: 200 N/mm².
Instructions for use:
- Distribute the powder evenly in the water and mix well for about 1 minute.
- Quickly and evenly pour the resulting mass into the mold.
- For molds with a well-defined structure, apply a small amount of compound with a soft brush to avoid air bubbles, then pour in the rest of the compound. Fasteners or other suspension systems can be pressed into the still-soft compound.
- The part can be removed from the mold about 30 minutes after casting.
- 2 to 8 days later, the molded part can be finished (sanded, painted, varnished).
Please note, during the drying period the part should be kept in a cool, dry place.
Dosage :
For 1 volume of water, add 3 volumes of powder.
For example, for 300 ml of water, add 1 kg of powder, making 650 ml of molding compound.
Sold in 1 kg bags.
