The UV'Glass lamp allows you to cure all your UV'Glass resin creations rapidly.
Very easy to use, just plug it in with the USB cable and :
Click once for 1 to 3 mm resin thickness (60s).
Click for a long time for the last layer, to obtain a better finish (120s).
Wait 1 to 2 min between each use so that your creations don't heat up too much.
The finish is dry and shiny.
Its feet fold away, so you can easily carry it with you.
If you use a mold, make sure it lets light through.
The pack contains a lamp, usb cable and instructions.
The lamp must be powered only at low voltage (connected via the USB cable supplied, to a computer for example), corresponding to the marking on the device.
The UV Glass lamp is theoretically compatible with other UV resins, but having not tested all UV LED resin references, we cannot confirm this.
Details:
24W
8 LEDS
Touch button 60/120 sec
Dimensions: 16x6.8x8.5cm
Sold per 1 piece



























