Turquoise Star beads green multi-strand necklace and gold medal

Looking for a DIY necklace to match your summer outfits? Here is a tutorial that you will surely like. This easy jewelry tutorial is for beginners. However, you will need to know the basics of jewelry creation, such as how to open a ring , loop on a nail and crush a pearl to crush correctly .

The star-shaped beads used in this tutorial are exclusive to Perles & Co. They were designed internally by our team. Star Beads come in different colors , do not hesitate to choose the color that suits you!

Step 1 :
Thread on a nail, 1 chips, 1 spike, 1 4mm round bead, 1 turquoise Star Bead, 1 round bead, 1 spike, 1 chips. Cut the nail 0.8 mm from the last bead threaded and form a loop with round pliers.

2nd step :
Attach the nail on both sides to two pieces of chain. Check the desired length. At each end of the chain, attach two rings.

Step 3:
Open a 4 mm ring and place it in the sequin. Thread the sequin on the chain. Adjust the size of the chain and place the ends on each side. Add them to the rings already attached to the first channel.

Step 4:
Cut 1 piece of nylon thread the length you want + 2 cm. Thread a bead to crush and iron a piece of wire in it before flattening it to create a loop. Put a bead cache to crush over. Thread the beads on the thread and make the same finish on the other side. Place the loops in the open 4 mm rings of the first chain.

Step 5:
Close the 2 rings 4 mm. Add another 4 mm ring on each side to secure the clasp.