Cement bowl

Instructions: 1.  In preparation place the big plastic ball half on a stable surface (e.g. mug, flowerpot, or other), so that it does not wobble. Oil the inside with the cooking oil.

 

2. Oil the small plastic ball on the outside.

3. Fill a small plastic bucket with approximately 150 ml of water, afterwards add small portions of approximately 1,5 kg of creative cement. Mix the mixture with a wooden crafting stick until the mixture is smooth and pourable. 

 

3. Fill a small plastic bucket with approximately 150 ml of water, afterwards add small portions of approximately 1,5 kg of creative cement. Mix the mixture with a wooden crafting stick until the mixture is smooth and pourable. 

 

 

5.  Let it fully harden. The curing time can vary, depending on the size and temperature (best let it harden over night). The bowl is completely hardened and can be used after 1-2 days.

 

 

6.  Now the mold can be demolded. First carefully remove the smaller plastic ball from the top. Afterwards remove the cement bowl from its mold by turning it upside down and Bending the pper edges slightly to the outside, thereby letting air in between mold and creative cement object. Carefully knock the mold onto a table, in order to loosen the cement bowl.

 

 

7.  If desired the bowl can be sandpapered, painted with chalky finish or decorated with deco-metal.