Tool Dip

How to avoid marking wires with jewelry pliers?

Tool Dip is a product that prevents tools from scratching wire, is anti-slip and guarantees a firm grip. It also greatly reduces wire marking when forming wire with jewelry pliers. There are pliers with silicone tips to avoid damaging jewelry primers, but if you want to use your own pliers, then tool dip is for you. This liquid product dries on the tips of the pliers, forming a film comparable to silicone. This film can be removed at any time and won't damage your tools.

Here's how to use this product.

Materials and advice:
A pair of pliers. For this example, we've used the round, glitter-handled pliers, and of course the Tool Dip.



Step 1:
Shake the jar of Tool Dip well before use.
Clean the tips of the pliers with a tissue, for example.



Step 2:
Dip the tips of the tweezers into the Tool Dip.




Step 3:
Remove tweezers slowly and evenly.



Step 4:
Leave to dry for approx. 2 hours.



Step 5:
Repeat steps 1 to 3, twice, to obtain three coats of Tool Dip.



Step 6:
To remove Tool Dip, push it off with your finger.