DIY Honeycomb Tea Towel Embroidered Autumn Leaves Fabric DMC Mouliné Etoile

How to embroider a design on a fabric?

How to make a cloth?

How to embroider with DMC® Mouliné Etoile yarn?

Learn your first embroidery patterns over DMC® stranded Star to make a cloth in fabric honeycombpattern and the colors of autumn. The embroidery thread DMC® Mouliné Etoile will bring a slightly glitteringshine to your DIY projects .

In this sewing tutorial and easy embroidery , you will learn the fly point . But if you want to change your point, you can take a look at our technical sheetThe 10 basic points in embroidery . You will also learn to make a hem . And if you have fallen in love with embroidery, find our creative projects using this trendy technique!

Come on, here we go !

Couture Party :

Step 1

Cut the honeycomb fabric rectangular 40 x 60 cm leaving an extra two centimeters for the seam and the edges of the cloth.

2nd step

Make the edges of the tea towel, folded upside down edges twice 1 cm + 1 cm.
Place the pins by pricking from right to left (they will be in the right direction to remove them by sewing).

Step 3

And now, bend the tip by taking it to the fold line.
Form the hem by bending the edge and making it coincide with the mark of the fold.
Fold one last time on the fold.

Place a pin close to the corner to maintain the fold.
Repeat again by pinning in the middle and redo the same for the remaining three corners.
Sew the hem. Start between two corners. Do not forget to stitch the needle to turn.

Bravo! Here are the angles of our cloth:

Embroidery Party :

Step 1

Insert the fabric into the embroidery drum , being careful to stretch the fabric tightly and tighten tightly.
Start by drawing the sheets with pencil. You can also use an erasable felt pen for fabric . Then put all the strands of the skein on a needle of size 2.4 mm. Take a length of 2 meters for larger leaves and 1 meter for smaller ones. Double the thread and tie the end, leaving 10 cm.

2nd step
It is therefore necessary to embroider leaves at the point of fly .
This point is also a filling point that makes it possible to form sheets.
Start embroidering on the underside of the frame so that the knot you made in the previous step is on the back of the frame.
The thread comes out in 1, then stitches in 2 to form a stitch.
Rewind in 3 and stitch at 4, keeping the thread under the tip of the needle.
Spring in 5 and stitch at 6 to maintain the point by a vertical point.
Continue by repeating steps 3 to 6.

Step 3
At the end of each leaf, make a knot at the back of the fabric.
Continue embroidering with the fly stitch for the other leaves while changing the star-spun thread color.

Step 4
Finally, cut the excess yarn on the back of the fabric.
Your embroidered cloth is finished!

We like to see what you do with the tutorials on Perles & Co. So, do not hesitate to send us photos of your creations on our Facebook page or to tag us on Instagram #perlesandco.