Resin Fimo earrings with silkscreen imitation wax wedding maria flowers

How to make Fimo clay earrings?

African wax fabrics are very trendy for a few years, they are used or imitated in all ways, whether for jewelry creations, fashion clothing or decorative objects. One can even find a silkscreen stencil to the fabric patterns wax the wedding flowers . You can have fun creating an outfit with our fabric matching your earrings.
Step 1
Take a half loaf of white paste of 57 g. Put your dough in the widest dough machine . Put your silkscreen on it and pass the roll to lay the stencil on the polymer and to chase the air.

2nd step
Apply black acrylic paint to the edge of a card and place it on the surface of your stencil.

Step 3
Immediately remove your silkscreen to wash under soapy water gently.

Step 4
Take an oval cookie cutter 4 cm long and then remove from the 2-piece plates. Take a 11mm 2 small round cookie cutter. You still have enough dough to make a second pair of earrings but of another shape, for example 2 rounds. Cook your pieces at 130 degrees for 30 minutes.

Step 5
Wait until your rooms are cool. Lightly sand the edges of all the pieces with an abrasive grain 1000. Take 2 alcohol inks, an orange and a yellow and then with a brush color the flowers of the pattern.

Step 6
Color all edges with black acrylic paint and the back of the pieces.

Step 7
Prepare your mix of resin components by adding 2 doses of resin for one hardener, mix it with a small wooden spatula and then transfer the mixture to another container. Wait 10 minutes for it to thicken then pour a few drops on a piece, spread the resin with the spatula to the edges. Protect the drying of the resin by putting a cardboard on top of the pieces. To prevent your resin creations from turning yellow over time, you need to protect your rooms from light for a fortnight. The resin will dry on the surface after 24 hours.

Step 8
Drill a hole in the larger pieces with a hand mandrel. Pass a ring in each hole.

Step 9
Glue the small circles on the discs of the earrings. Reattach the rings of the center pieces to the holes of the supports close well your rings.
We advise you to make several polymer pieces so as not to lose too much resin. It happens that after drying of resin there are on edges of pieces of gaps. A second resin application will solve this problem. Good creations.