Cheyenne openwork plexiglass pendant with glass beads by Puca

Thread the divider and 1 R15, then iron in your divider.

Put on 1 R15 and reassemble in your divider as well as in the R15.

This is the result.

Loop 3 R15s through the R15.

This is the result.

Turn your part over. For reference, the back is where your starting thread is (2 threads).

Repeat step 4, place 3 R15.

Pass over the top into the R15 at the start and pass back underneath into the R15.

So we're positioned underneath. Thread 3 R15s into the next hole.

Thread 1 R15 as in step 1 and continue steps 1 to 9. Work your way around.

We get this result above. It will help you find your way around.

This is the result below, to help you find your way around.

This is the result. Next, move to the central R15.

Thread 1 Arcos, 1 R15, 1 Minos, 1 R15. Pass through the second hole of the Arcos, then through the next central R15.

Put on 1 Minos, then move on to the next central R15. Alternate steps 14 and 15.

This is the result. Stand in the Arcos and place your mounting ring.

Put on 1 R11.

Pass under the circle, up into the R11 and Arcos and the central R15 below (back of work).

Thread a Bugle bead between the central R15s (red dots).

Climb back into the Arcos and don 1 R11.

Pass through R15, Minos and R15, then through Arcos and repeat steps 17 to 21. Complete the tour.

This is the result.

All that's left to do is place your charms with the help of a ring and insert your cord.