Jewelry tooling kit - bocfil + fretsaw nr 2/0 + wooden workbench dowel

This jewelry tooling kit is perfect for beginners.

You will find in this kit a bocfil : in jewelry, the bocfil is the saw of the jeweler.
Indispensable tool for a jeweler.
Indeed, sawing is one of the basic operations in the manufacture of jewels.

Be careful to use the saw blade in the correct direction: the teeth must be facing downwards.
Little tip: pass your finger on the blade, if it hangs it is not good, change direction!
You can coat the blade with beeswax so that it slides more easily and wears less quickly.

Made in Germany, very high quality.

You will find in this kit a workbench dowel. A dowel is a piece of wood that is attached to the center of the the workbench or on a table corner.

You can fix it anywhere thanks to the supplied clamp.

We advise you to make first simple exercises at the beginning such as sawing straight lines, curves, or angles, ...

Do not worry if you break a lot of saw blades at first, that's normal!

This kit includes:
- 1 bocfil
- 12 saw blades nr 2/0
- 1 C-shaped clamp and a wooden workbench dowel with a V-notch

This kit will allow you to cut many metals: silver, copper, brass, aluminum ... (you will however need to adapt the blade to the thickness of the plate you want to cut).