This decorated clamp is made of brass with a gold finish.
One side has claws to firmly hold ribbons, bias or flat cords up to 10 mm wide, while the other side remains smooth for a neat finish.
The fastener on top has a ring with an internal diameter of approx. 1 mm, ideal for passing an open ring or thin chain through.
How to use this end cap
Place your ribbon or cord inside the ferrule (folded back 0.5 cm if too thin), then gently tighten with flat nylon-tipped pliers to avoid marking the metal.
For added strength, add a dot of Hasulith glue before closing.
This tip is perfect for finishing a necklace, multi-rank bracelet or choker with a textured golden touch. It creates clean, durable and aesthetically pleasing finishes.
If you're just starting out in the world of costume jewelry, we invite you to take a look at our technical data sheet dedicated to clamping tips.
There you'll find practical advice and step-by-step tutorials to make all your finishes a success.
Details:
Height: 6 mm
Width: 10 mm
Internal hole diameter: 1 mm
Sold in bags of 4.
