These brass decorated crimp-end for ribbon are plated with a silver finish.
1 side with claws and the other without for a better finish.
Use these jewelery accessories to create DIY costume jewelry: for example, you can insert several cords, a bead weaving or a 10 mm wide ribbon.
You will need a jewelry pliers with a nylon tip to close this crimp-end without damaging the metal.
We advise you to add a point of glue type Hasulith for more security. When using a ribbon or a rather thin bias, consider folding it on itself 0.5 cm.
This small tip gives an extra thickness and allows the crimp-end to hold on to the ribbon.
The inner diameter of the loop of the crimp-end is 1.4 mm, therefore we advise you to use jumprings open that have a wire diameter of 1.4 mm maximum.
If you are a beginner, see our technical sheet to learn how to use a crimp-end.
You will find in this category tips and advice to get started in the creation of DIY costume jewelry.
Sold by 4.
