These brass claw ends are finished in gold.
1 side with claws and the other without for a better finish.
Use these jewelry primers to create DIY costume jewelry: for example, you can insert several cords, a weave of pearls, several Liberty fabric bias strips or a 25 mm wide ribbon. You'll need flat jewelry pliers with a nylon tip to close this component without marking the metal.
We recommend using Hasulith-type glue for added safety. When using thin ribbon or bias, remember to fold it over itself by 0.5 cm. This little trick gives extra thickness and enables the tip to cling well to the ribbon.
The internal diameter of the tip fastener is 1.4 mm, so we advise you to use open rings with a maximum wire diameter of 1.4 mm.
If you're a beginner, have a look at our data sheet on how to use a clamping tip. In this category, you'll find tips and advice on how to get started withassembling costume jewelry.
Details:
Height: 5.5
Width: 25 mm
Internal hole diameter: 1.4 mm
Sold in bags of 4
