Cléopâtre shiny vitrifying varnish 100ml A

Ultra shiny and very resistant. Vitrifies and protects from the shocks. Ideal for glass and porcelain decoration and protection on all kinds of bases (Fimo and Kato Polyclay, paper, towel,). Instructions: apply a very fine layer of varnished by brush. Fire in the oven during 15mn at 110°C. To increase the surface resistance and to improve the brightness, repeat the operation as many times as necessary.

New formula, acid and solvent free.
More environmentally friendly.
Its whitish aspect eases a homogeneous application.
This varnish adheres perfectly on polymer clay, even non-sanded before application.

Instructions for use:
Do not shake the bottle before use to avoid small bubbles, difficult to remove while applying the varnish.
Apply one or various thin layers of varnish with a brush.

If you apply one or two layers:
Bake in oven during 30 minutes at 60/80°C for polymer clay pieces (the baking time may vary according to the oven).

If you apply three layers or more:
To increase the resistance of the surface and to improve the gloss, repeat the operation as many times as necessary. Bake in oven during 20 minutes at 100/110 ° C for polymer clay pieces (baking time may vary according to the oven).

Baking in the oven is recommended, but it is also possible to let it air dry (drying time: approx 7 days). In that case the varnish is less resistent.

Bubbles or discoloration indicate excessive temperature of the oven.

Store the varnish between 15 and 40 ° C.
Supervision of an adult is required if children uses this varnish.

Made in France, no solvents.
Contains: 100ml.