The ready-to-use liquid soldering flux in spray form protects the metal during soldering, prevents the metal from oxidizing under the heat of the flashlight. It is a soldering flux without toxic substances.
How to use the soldering flux? This soldering flux is available in spray form. Spray the flux all over the workpiece, then apply it to the straw that you are about to solder.
What are the benefits of this solder spray?
1. This product is non-carcinogenic, non-toxic and non-harmful to health. It does not give off any vapors that are harmful to health.
2. You solder faster. Indeed, the time of soldering is reduced by 60%.
3. No need to put it in the dryer, just put it in warm water or in the ultrasonic after the brazing to remove the traces of oxidation.
Instructions for use:
The part to be soldered must be preheated to 100°. The trick to finding this temperature is to put a drop of water on the part and heat it up. When the water evaporates, it means that the part is at the right temperature.
We then put the Firescoff where we want to protect and then we put the straw with a clean tweezer.
Do you want to start soldering? To start, youwill also need a beginner's soldering kit, as well as a ceramic soldering plate, soldering plate, soldering powder and possibly a third hand. The Dremel flashlight will be perfect for small soldering jobs such as soldering a ring or soldering earring posts.
You can also find our technical sheets to help you in your first steps and discover how to cut soldering straw or how to use a deroche.
Sold by bottle of 30 ml
-.jpg)
