Heart wool pompom bag charm

How to create bag jewelry?

How to make a wool heart pompom? There is a tool, a pompom maker that can make pompoms of all shapes and especially that of the heart. We show you in this step by step how to use it and an idea of ??creation from this pompom. This jewelry bag will go perfectly on plain fabrics or bags and baskets trend nature with straw or natural materials.

Step 1

Open your pompom maker and make sure that the center elements in white are in the same direction. On one side it's rounded and on the other side it's flat.

2nd step

Start circling the 2 half-rounds together on one side starting at one end.

Step 3

Continue to wrap your wire wool until the end of the half-round roses. You can put a lot less wool than in the photo, even if we see the pins it will be successful and easier for the next steps. Close this arm against the white part to block the wool.

Step 4

Surround the second arm of the pompom maker and close it.

Step 5

Take about 30 cm of yarn to go around your tool on the edge. One round is enough.

Step 6

Make a simple knot that can be undone later. You have pins that serve to hold this central wire by surrounding the ends around it for the next step.

Step 7

Cut all the threads following the slot of the pompom maker provided for this purpose on both sides. Equalize the height of the wires.

Step 8

Carefully remove the simple knot from the previous step, hold it tight while tightening the thread. The woolen threads are almost going into the apparatus. Make a double knot without cutting the ends of threads. Separate by gently pulling the 2 parts of the tool then to finish open the remaining arm to release your pompom. The heart pompom has a look too coarse you must refine the shape by cutting the outline with your chisel.

Step 9

Glue the end of the woolen threads with glue or varnish and put some colored wooden beads on the 2 threads. Close by knotting.

Step 10

Pass a ring in the tassel hole. Take a loop rod, put on 4 colored beads and then pass this stem from the tip of the heart through the pompom. Make a large loop with a pin with the rod protruding to prevent it from sinking into the pompom and keep it in place.