Earrings and Pendant Necklace Golden Sun simple jewelry assembly

The ear studs used are gold plated. If you want to make 100% gold filled earrings, go to the category "Jewelry Primers - Gold Filled Earrings" or at the bottom of the page.

To make these earrings inspired by Japan with its stylized Japanese sun pendant, only one step is necessary:

Open the 5.5 mm ring with two jewelry pliers. Pass the ring through the mother-of-pearl pendant. Slide the pendant and the earring ring into it as well, paying attention to the direction of each element. Close the ring with two clips by rotating the two ends and closing with a slight back and forth motion. Go to our video datasheet to see how to open and close a ring.

The realization of these earrings is identical to the Japanese inspired earrings. You will have to use a large open ring 8 mm, because the gem pendant is very wide. If you use a smaller pendant, you can use a smaller ring.

Cut the chain to the desired length to make your necklace. In the photo, we did not cut it back. Add a 4mm ring to each end of the chain and attach the spring clasp to one of them. Place a ring on the pendant as well. Fold the chain in half to find the middle and close the pendant ring into a mesh in the middle of the chain. You can also just loop the chain through the inside of the ring if you want the pendant to slide over the chain.