Free shipping on orders over 50€ up to 500g
French Online shop for beads and accessories for the creation of DIY jewellery and other creative hobbies

Log-in

Tubular Brick Stitch bangle bracelet Miyuki green pearls

Made by :Tiffanie Perles Co
Published on the :11/06/2020
Time :6h
Level :Intermediate
Prices :31,21€

How do I make a Miyuki bead rush?

Don't worry, this weaving technique is very easy! If you're a beginner, however, it's best to start with flat Brick Stitch weaving to fully understand how this technique works. Once you've mastered Brick Stitch, you'll automatically master tubular Brick Stitch too, as it's the same technique, with the simple difference that your bead base is a circle.

Here are a few tutorials to help you practice Brick Stitch weaving:

You can also create necklaces using this bead weaving technique. Be careful, however, if you try to weave with a larger diameter. Bending the weave exerts pressure which, if too strong, can break the beads. This tension is a little stronger when weaving with a larger diameter, so the curvature needs to be smaller.

Bracelet Brick Stitch tube :

Schéma Bracelet jonc en Brick Stitch tubulaire perles Miyuki vertes

  1. Start by creating a ladder stitch base of 6 beads.
  2. Connect the first and last beads with a loop.
  3. Start weaving row 2, increasing the length with two beads.
  4. Go around row 2, then connect the first and last beads with a loop as well, before moving on to row 3 and repeating steps 3 and 4.
  5. Repeat the pattern as many times as necessary to get a bracelet that fits. You can also shorten it at the ends if adding a whole pattern makes your bracelet too big. Here, we've repeated the pattern 6 times.
  6. Put a generous dose of jewel glue in the tips and push the ends of the tube in, rotating it a little so that the glue spreads evenly. Leave to dry for 2 hours.
  7. Once the glue has set, assemble the bracelet, adding the extension chain and the clasp with open rings.

Your Miyuki summer bead bracelet is ready! We recommend stacking it with other colorful bracelets or Gold Filled bangles.

Bracelet jonc en Brick Stitch tubulaire perles Miyuki vertes final

Bracelet jonc en Brick Stitch tubulaire perles Miyuki vertes pinterest

Feel free to show off your creations on our Facebook page, in the Perles & Co Customer Super Club group or on Instagram by tagging us with @perlesandco or #perlesandco.

Result
Schema  Tubular Brick Stitch bangle bracelet Miyuki green pearls
Schema  Tubular Brick Stitch bangle bracelet Miyuki green pearls
Tiffanie Perles Co
 Tiffanie Perles Co - Les tutos de Tiffanie
Bonjour, moi c'est Tiffanie. J'étais créatrice et designer produit chez Perles & Co. J'adore tester de nouveaux DIY et vous faire profiter de mes expériences. Vous pouvez toujours consulter les tutoriels que je vous avais concocté sur le site !
Associated keywords
Share with my friends
Which material to use ?
Supplies
Jewel Glue Hasulith 30ml
OUTIL-007
Qty : 1
5592 in stock
2,40€
Miyuki Delica 11/0 DB0311 - Mat Metallic Dark Olive
4,50€
Ko Thread 0.25mm Dark Olive x50 m
UFC-733
Qty : 1
120 in stock
2,90€
Miyuki Delica 11/0 DB1585 - Mat Opaque Avocado
2,60€
Cord ends 5 mm - Fine gold plated x4
OAC-455
Qty : 1
68 in stock
3,90€
Miyuki Delica 11/0 DB2283 - Opaque Glazed Citron Mat x8g
4,90€
Weaving needles - Pony - Size 12 - 0.31x51 mm x25
1,90€
4x0.6mm Stainless steel 316L open Jump rings - Gold Tone x10
2,00€
11 mm carabiner clasp - 304L stainless steel, gold-plated x1
1,10€
Subtotal : 31,20€
Your questions (1)

You have a question about this tutorial? Ask it to our team and the people who have already tested it. The Perles & Co community is here to help you!

By NATHALIE (02/06/2025 16:39:16)
Bonjour est ce qu il est possible d enfiler ce bracelet dans un bracelet jonc et si oui lequel ? Merci
Translate the question
Please log in to use this feature
Our Margaux expert answers you (07/07/2025 11:33:26)
Bonjour, vous pouvez mettre un jonc de moins de 2 mm de diamètre à l'intérieur. Je vous conseille, dans ce cas, de tisser le tube sur le jonc directement. Voici des joncs qui pourraient convenir : https://www.perlesandco.com/bracelet-jonc-fin-1.6x160-mm-avec-2-anneaux-fermes-acier-inoxydable-304-dore-x1-p-483241.html https://www.perlesandco.com/bracelet-avec-fermoir-boule-vissee-61x45-mm-dore-a-l-or-fin-x1-p-8631.html
Translate the answer
Your reviews (4)
Notices subject to control
3.5/5
Average Grades
Please log in to use this feature
By Sophie (posted on : 11/12/2023 )
Heureusement qu?il y a la vidéo parce que je ne savais pas ce que voulait dire « ladder stitch » . Le tuto est plutôt sommaire mais la vidéo est très bien faite comme d?habitude. Merci pour vos partages.
Translate the notice
Our Tiffanie J. expert answers you (11/12/2023 18:01:14)
Bonjour, le texte a été ajouté simplement pour illustrer la vidéo, il ne s'agit pas vraiment d'un tutoriel. Cordialement
Translate the answer
By Corinne (posted on : 06/08/2023 )
Bonjour, merci pour le tutoriel.le modèle est très joli. Juste une question pour suivre les rangs, il faut démarrer par exemple au rang 1 à droite et le rang 2 par la gauche du schéma et ainsi de suite où toujours démarrer du même côté du schéma ? Merci
Translate the notice
Our Lucie T. expert answers you (08/09/2023 14:28:33)
Bonjour, vous devez commencer par la première rangée à gauche et continuez le tissage vers la droite. Vous devez répéter le motif autant de fois que nécessaire pour obtenir la taille du bracelet souhaité. Merci
Translate the answer
By Mary Xmas (posted on : 17/02/2023 )
Je viens de démarrer ce bracelet et le rendu est très chouette. Toutefois, c?est un peu confus pour suivre le schéma? pas vraiment d?ordre par rapport aux rangées dessinées, du coup, il faut bien se repérer en 3D afin de visualiser le bracelet en circulaire? Je me suis trompée à la 1ère tentative mais la seconde était la bonne.
Merci pour cette technique !
Translate the notice
Our Tiffanie J. expert answers you (28/02/2023 09:18:57)
Bonjour, effectivement il faut se repérer en fonction du motif. Merci pour votre avis.
Translate the answer
By liliane (posted on : 25/10/2020 )
Tutoriel très rapide et non commenté, pour le peu de vidéo c'est vraiment pas la peine de la faire dessus pas satisfaite,
cela a vraiment changé.
Translate the notice
Answer from customer Tiffanie (26/10/2020 16:23:11)
Bonjour Liliane,
Dans un objectif d'amélioration continue de nos services, nous prenons en compte votre avis et celui de toutes nos client(e)s. Je ne connais pas votre expertise sur le tissage Brick Stitch mais vous avez dû lire que ce tutoriel est noté "niveau intermédiaire" en haut à gauche de la page. Il vous faut maîtriser le tissage Brick Stitch afin de pouvoir comprendre facilement la vidéo.

Par ailleurs, nous attachons une importance particulière à la réalisation de nos vidéos : le temps conseillé d'une vidéo-tuto étant de 10 minutes maximum, nous accélérons légèrement afin de rester compréhensible et de ne pas lasser nos client(e)s. La technique utilisée à chaque rang de cette création est la même du début à la fin. Si nous devions filmer la réalisation du bracelet en entier, nous aurions obtenu une vidéo de 6h ! N'hésitez pas à mettre en pause !

Enfin, si la technique Brick Stitch vous intéresse et que je peux vous aider, je vous invite à me recontacter ou à consulter cette fiche technique : https://www.perlesandco.com/Comment-demarrer-un-tissage-Brick-Stitch-f-427-33.html?praPath=33

Bonne journée !
Translate the answer

Credits

Perles & Co, Internet & E-Commerce company [11/06/2020] Any reproduction, representation, adaptation, in any form whatsoever, even partial, is prohibited, except for reproduction for private use not intended for collective use, representation in the family circle (art. L 122-5 CPI) and online publishing on condition that the source is mentioned and a link is included to the corresponding page of our site www.perlesandco.com.