Place mark up and other wedding decorations

We'll show you 3 basic techniques for creating wedding decorations from aluminum wire.
You'll be able to create place cards, table decorations...

Step 1:
Take aluminum wire, wire cutters and round-tipped pliers.

Step 2:
Cut approximately 15 cm of aluminum wire.

Step 3:
To make a simple open ring, shape the aluminum wire around a pen or triboulet.

Step 4:
Remove the ring formed in the previous step from the pen.
Then cut off the excess wire.

Step 5:
With this technique, you can make double rings.

Step 6:
We're now going to form a loop.
To do this, take a piece of aluminum wire (the length will depend on the size of your loop).

Step 7:
Hold the end of the aluminum wire and form a loop by bending the wire.
You can also use round-ended pliers.

Step 8:
To form a second loop, hold the base of the first loop with your fingers.

Step 9:
Form the second loop as shown above.

Step 10:
We're going to make a closed ring.
To do this, form a ring with the aluminum wire.

Step 11:
Use aluminum wire with a smaller diameter than that used to make the ring.

Step 12:
Wrap this new aluminum wire around the ring.

Step 13:
Make a few turns, then cut it.

With these 3 techniques, you can make a multitude of original creations with aluminum wire.
Enjoy your creations!