DIY Ines dangle earrings in pearl and sequins weaving

How to make dangling earrings in weaving of pearls and sequins?

Today, Sylvie creator of the page Of the Wire and Of the Pearls one of our customers and partners proposes you to realize a pretty pair of hanging earrings. These two-tone earrings, combining gold and silver, adapt to all styles, and all the outfits. Perfect for the holidays! We love this chic and handmade look.

You can of course adapt the colors for a jewelry that looks like you! Find all our references Miyuki Delicas beads 11/0 by colors . It's your turn ;)

The steps :

Step 1 : Cut 60 cm of silver copper wire. Thread 5 golden delicas on them and center them. Crosiez son in a bugle money.

Position a # 10 needle in your golden darts to keep them aligned.

Pass each wire through the corresponding holes in the bridge pad.

Cross the threads in a second silver bugle, then turn it to the golden delicas and cross the threads in these delicas after removing the needle.

Step 2 : Put the needle back in the 5 golden delicas to park them aligned and start the weaving of the central part (5 delicas per line) following this diagram:

1 - 1 white / 3 gold / 1 white
2 - 2 whites / 1 golden / 2 whites
3 - 5 money
4 - 1 white / 3 silver / 1 white
5 - 2 whites / 1 silver / 2 whites
6 - 5 golden

Cross the threads in the delicacies of each line, tighten the rows and move the needle as you go to obtain a regular result.

Step 3 : Cross the threads in a silver Bugles, slip on the second bridge pad (pay attention back and up, the place is smoother and curved) and cross the threads in a second silver Bugle.

Flip the last Bugle to the weave and cross the threads in the 5 golden delicas of line 6. You have closed the interlayer in the same way you did at the beginning. For added strength, iron the wires again in this assembly.

Step 4 : Re-thread the threads in each row of Delicas, from line 6 to line 1, and also in the 5 golden Delicas set at the very beginning. You can cut flush the outgoing wires in the row to stop work.

Step 5 : Make a small decoration on each side to embellish your jewel. Cut 3 balls in the chain, attach a tip on each side with a pair of pliers and fix everything on the holes of the bridges, each side with rings of 3x0.5mm.

Step 6 : Thread a 10mm steel medal and a 6mm gold sequin on a ring. attach everything to the base of your earring. All you have to do is add your ear hook.

Your pair of earrings is over! There's more to wear!






Do not hesitate to show us how you mix these earrings with your look, by sharing your photos on our social networks: our Facebook page and our Instagram page