Discover this kit of 3 basic colors (transparent, black and white) of Sculpey liquid polymer clay!
Sculpey liquid clay is ideal for a variety of techniques:
- Transfer of images, color or black & white photocopies and drawings.
- Creation of elements that remain flexible once fired.
- This liquid can be used to fill the hollows in textured polymer clay with a stamp or plate.
This liquid can be colored with alcohol inks, dry pastels, a small amount of acrylic paint or stained glass paint.
Perfect for use with silicone molds. Firing time is 20 minutes, but the liquid may turn yellow if you exceed this time or if you do several firings.
To obtain true transparency, you need to fire at 150 degrees; below this temperature, this liquid polymer will remain semi-opaque.
How to use this liquid polymer?
For the decal:
- Spread a thin layer of Liquid Sculpey over the image.
- Bake according to instructions.
- Remove from oven and leave to soak in water for 5 minutes.
- Rub lightly to remove the paper. Rub lightly to remove paper with finger.
To dilute:
- AddSculpey fabric softener until desired consistency is reached.
If you're using a silicone mold, heat the mold for 15 minutes at 130°C, then pour the Sculpey Liquid into the mold and bake at 130°C for 15 minutes.
Want to get started with polymer clay? We've prepared a video to tell you all you need to know about Liquid Sculpey and a practical sheet on how to use liquid polymers. Now it's your turn!
3 x 30 ml bottles.
