Personalize all your DIYpolymer claycostume jewelry with this floral transfer sheet!
This transfer sheet is used to reproduce an image on a polymer clay plate. It is entirely water-soluble. Once the image has been transferred, the paste can be cut and applied to a support to create pretty DIY jewelry. Please note that this is a one-time use only.
You can use any polymer paste, but the result will be of better quality if you use clear paste.
How to use soluble transfer sheets for polymer clay?
- Roll out your Fimo clay with a roller or polymer clay machine. Place it on a tile.
- Cut out the design and place it on the smooth, clean clay (before firing) with the image facing down.
- Smooth with your fingers or gently roll to remove any air bubbles. Leave to rest for 10 to 15 minutes to allow the ink to transfer to the dough.
- Spray the transfer sheet with water, or run the tiles directly under a low-temperature water tap (a small trickle of water is required). Rub away any remaining paper with the pad of your finger. Once the paper has dissolved, the image remains on the polymer.
- Leave to dry for 5 to 10 minutes.
- Quickly cut the plate as required and apply it to the desired surface.
Handle the paste carefully, avoiding placing your fingers on the image. - Bake your polymer clay as usual, at the temperature indicated by the manufacturer.
- If any paper residue remains after firing, you can remove it by running your piece under water (with a small trickle) and rubbing gently with your finger.
Fimo beginner? Check out our list of essential tools to get you started. Our tips and step-by-step instructions will help you learn the Fimo clay technique. Then it's easy to create beautiful jewelry and animal models.
What can you do with fimo clay? No creative ideas? Get inspired by our online Fimo clay jewelry tutorials. Get started!
Details:
Height: 13.5 cm
Width: 9 cm
Sold per 1 piece.
