Vlieseline FixierStickvlies brod' is an iron-on backing for embroidery.
It is used in sewing to stabilize fabric.
Can be printed.
Advantages:
Allows for precise, iron-on application.
No deformation of your substrate.
Perfect for drawing and pencil tracing.
Ideal for patchowrk.
Instructions for use:
Attach a piece of Brod' larger than your design to your backing and embroider.
Simply tear off the Brod' backing.
Help with patchwork, quilting or quilting:
Draw the design on the backing and iron it onto the right side of the fabric.
Embroider the motif, then tear off the iron-on Brod'.
Your fabrics can be stabilized for printing in an inkjet printer:
Cut your fabric to the required size (e.g. A4 format).
Iron on the reverse side a piece of Brod'thermocollant of the same size and print with indelible ink, if possible.
Once printed, you can remove the piece of Embroider'iron-on from the back of your fabric.
We recommend that you always carry out a test before use.
Use in video.
Width: 90 cm.
Composition: 80% polyethersulfone and 20% wood powder
Washable at 60° or dry-cleanable.
Quantities are expressed in multiples of 10 cm.
To order 1.20 m, simply enter 12.
Sold by the cut: the length purchased will be delivered in one piece.
