Constellation Ring with paste Ceralun and PureCrystal round stone

To create this beautiful ring, you will need some basic tools such as : Pour réaliser cette jolie bague, vous aurez besoin de quelques outils de base : cutting pliers, electronic balance, une petite balance, pencil shaping cutter, and latex gloves.

IMPORTANT: Always wear gloves when handling the Ceralun paste! (Read safety information) Step 1: On a clean, flat work surface, cut a small piece of each component (A and B) of the Ceralun paste (they must have the same weight). Mix them together until you have a homogeneous paste.

Step 2 : Put the paste ball on your ring to form a rounded cabochon. Smooth the paste with your gloved fingers. 

Step 3 : Cut the ring attachment of the star earring using cutting pliers, and its rod, leaving about 3 mm length. Do the-same with the 2 small stars earrings.

Step 4 : Press the stars in the Ceralun paste, then using the rhinestone place some 3mm PureCrystal cabochons. You have to push the whole point of the cabochon.

Step 5 : Continue with 2.2 mm cabochons by the outside circumference of your ring, alternating colors.

Step 6 :Continue by performing a faded as below, fill small spaces with round 2mm crystal color cubic zirconia .

Let the paste Ceralun herden about 12hours, your jewelry is done!