Efcolor overglaze powders are ideal for giving a glazed look to your creations while avoiding the constraints of firing traditional enamel in a specialized kiln!
Slight shrinkage may occur during drying.
Instructions for use:
- Lightly sand your surface with the sanding block.
- Sprinkle your surface with the powder of your choice, using a sieve (the powder layer must be fine and even to avoid a bumpy finish).
If the surface of your support is not flat, use Efcolor Fixer to help the powder adhere properly. - Using a spatula, place your creation on the most suitable Efcolor baking tray, then bake in a Brillantstique oven at 160°C for 3 to 5 minutes (the powder melts and sets at 150°C) or with the Efcolor oven.
- Remove the baking tray with your creation still on it, using a potholder or clothespin, and leave to cool.
Your creation is finished!
You can also add effects, superimpose layers and colors, inlay decorative elements...
For all these other techniques, take a look at the explanatory sheets in the additional photos opposite!
Mixable overglaze powders.
Suitable for all substrates capable of withstanding firing temperatures of 180°C (metal, wood, glass, porcelain, polymer, etc.).
Caution: these powders are highly volatile, so be sure to wear gloves and a dust mask when handling them.
Ventilate well.
Sold by 25ml bottle.
Sieve not included
