Hold your engraving or crimping parts firmly with GRS Thermo-Loc sticks, which are easy to shape and reusable.
GRS Thermo-Loc sticks are a thermoplastic material ideal for immobilizing a workpiece during a precise operation: engraving, crimping, filing, drilling or localized polishing. Their advantage: they soften in the heat, can be shaped by hand, then harden as they cool to fit the shape of the object perfectly.
It's a non-toxic product, respectful of the environment and your health.
And last but not least, it's infinitely reusable.
How to use thermo-loc sticks?
1- Place thermo-loc sticks in a container of hot water to soften. Or place them in the microwave for ten seconds.
2 - Shape them by hand as if you were working with modeling clay.
3 - Place the part you wish to engrave or crimp in the thermo-loc. Once cooled, it becomes hard again and retains the shape you've given it.
4 - To remove the engraved part, soften the thermo-loc again by immersing it in a container of hot water.
To find out more about thermo-lock, take a look at our video in which Lucie shares her tips and tricks for using it.
Discover our wide range ofjewelry tools and equipment: bocfil, dowel, dremel, flashlight, sandpaper, soldering tools... You'll be able to play jeweler's apprentice and create costume jewelry from A to Z.
Whether you're just starting out or already have experience of technical assembly, our tutorials and technical sheets are here to guide you. You'll find advice on how to prepare your pieces, choose the right gestures and optimize your finishes, so you can work more cleanly and with greater peace of mind, whatever your project.
This product is non-toxic.
Specifications:
Length: 15 cm
Sold in bags of 30 sticks
