Efcolor overglaze powders are ideal for giving a glazed look to your creations while avoiding the constraints of firing traditional enamel with a specialized kiln!
Instructions for use:
- Lightly sand your surface with the sanding block.
- Sprinkle your surface with the Efcolor powder of your choice, using a sieve suitable for 10 ml Efcolor bottles (the powder layer must be fine and even to avoid a bumpy finish).
If your surface is uneven, use Efcolor Fixer to help the powder adhere properly.
- Using a spatula, place your creation on the most suitable Efcolor baking tray, then bake in a Brillantstique oven at 160°C for 3 to 5 minutes (the powder melts and sets at 150°C) or with the Efcolor oven.
- Remove the baking tray with your creation still on it, using a potholder or clothespin, and leave to cool.
Your creation is finished!
You can also add effects, superimpose layers and colors, inlay decorative elements...
For all these other techniques, take a look at the explanatory sheets in the additional photos opposite!
Made in Germany, miscible powders.
Suitable for all surfaces that can withstand firing at 180°C (metal, wood, glass, porcelain, polymer, etc.).
Caution: these powders are highly volatile, so be sure to wear gloves and a dust mask when handling them.
Ventilate well.
Sold by 10ml bottle.
Sieve not included
