Efcolor overglaze powders are ideal for giving a glazed look to your creations while avoiding the constraints of firing traditional enamel in a specialized kiln!
Slight shrinkage may occur during drying.
Instructions for use:
- Lightly sand your surface with the sanding block.
- Sprinkle your surface with the Efcolor powder of your choice, using a sieve suitable for Efcolor 25 ml bottles (the powder layer must be fine and even to avoid a bumpy final finish).
If the surface of your surface is not flat, use Efcolor fixative to hold the powder in place. - Using a spatula, place your creation on the most suitable Efcolor baking tray, then bake in a Brillantstique oven at 160°C for 3 to 5 minutes (the powder melts and sets at 150°C) or with the Efcolor oven.
- Remove the baking tray with your creation still on it, using a potholder or clothespin, and leave to cool.
Your creation is finished!
You can also add effects, superimpose layers and colors, inlay decorative elements...
For all these other techniques, don't hesitate to take a look at the explanatory sheets in the additional photos opposite!
Made in Germany, these powders are miscible with each other.
Suitable for any surface that can withstand a firing temperature of 180°C (metal, wood, glass, porcelain, polymer, etc.).
Caution: these powders are highly volatile, so be sure to wear gloves and a dust mask when handling them.
Also ventilate the room.
Sold by 25ml bottle.
Sieve not included.
