This soap mould will allow you to create original DIY soaps.
This rectangular silicone mould is flexible, stable, heat resistant and can be reused as many times as you like. This mould is sold with a rectangular wooden box.
You can put your homemade soap in the box once finished, ideal for decorating your bathroom.
How to use this rectangular soap mould?
It is very simple, once your preparation is ready (melted soap, colouring and perfume added), fill your silicone mould.
This soap mould has a very large capacity, you can pour in 600 g of glycerine.
It is also possible to mix colouring agents and fragrance oils directly into the soap mould.
Tip: to avoid air bubbles, pour the melted paste into the mould slowly and at a low level.
How do I unmould a soap?
Depending on the temperature of the room and the size and thickness of the soap, you will need to wait about 30 to 60 minutes for it to harden.
Once the soap has cooled and hardened to the touch, remove it from the mould using a cutter or knife.
All that's left to do is slice your soap bar and finish by removing any small imperfections around the edges.
At first glance, making your homemade soap may seem complicated, yet by following the soap making recipe, it's easy!
Details:
Length: 26 cm
Width: 6.5 cm
Height: 7 cm
External dimension of the mould: 26.5x7x7.5 cm approximately
Sold individually with the wooden stand
/im-Make-your-own-soap.jpg "Make your own soap")
