Discover this jeweler's hammer ideal for setting stones, riveting, embossing or texturing metal!
It features a thin, hollow hammer head that holds one of the three stainless steel punches provided. The tip stays aligned with the hammer body, so each hammer blow is perfectly straight. The force of the hammer is perfectly controlled.
The hammer head pivots and allows for easy angle adjustment. The weighted head pivots on the handle and the punches can be turned in the head, making it easy to work at any angle.
How to use this crimping hammer?
1. Remove the screw on the head of the hammer. Slide in one of the punches, then replace the screw and screw in.
2. Simply position the punch where you want it.
3. Hold it with your hand to help you.
4. Slide the hammer head up and down, back and forth.
Details:
Rosewood handle length: 24 cm
2 round flat face punches 3.4 mm and 2.5 mm stainless steel
1 rectangular tip punch 5 x 1.6 mm stainless steel
Sold with 3 punches
