Saw blade for bocfil - jewelry tooling - n°2 x 12

Saw blade for bocfil.

These jeweler saw blades are to be used with our bocfil.
This small saw will allow you to cut shapes in metal plates or saw the big wire.

Be careful to use the saw blade in the correct way: the teeth must be facing downwards.
You can coat the blade with beeswax so that it slides more easily and wears less quickly.

Made in Germany, of special hardened steel.
They are of very high quality "Herkules White Label" n ° 2 (1.02 mm approximately)
The size of the saw blades ranges from 8 (very thick saw blade) to size 6/0 (very thin saw blade).

Length: 13 cm

Sold by tube of 12 saw blades.