Saw blade for bocfil.
These jeweler's saw blades are for use with our bocfil.
This little saw will enable you to cut shapes in metal plates or saw thick wire.
Be careful to use the saw blade in the right direction: the teeth should face downwards.
Tip: run your finger over the blade. If it catches, it's not good: change direction!
You can coat the blade with beeswax to make it glide more easily and wear less quickly.
These German-made blades are made of special hardened steel. They are of the highest quality "Herkules White Label" 2/0 (approx. 0.8 mm).
Saw blade sizes range from 8 (very thick saw blade) to 6/0 (very thin saw blade).
This 2/0 size is intermediate.
Discover our wide range ofjewelry tools: bocfil, files, dowels, dremels, flashlights, abrasive papers, soldering elements, etc.
You'll be able to play jeweler's apprentice and make jewelry from A to Z.
Wondering how to work with metal? Here are a few tips and tricks to get you started with metal clay.
To make it easier to work with a file or bocfil, we recommend our jeweler's dowel, which fits onto a workbench or corner of a table.
Length: 13 cm
Sold in bags of 144 pieces.
