Product description
Lastingly protect your Raysin and creative concrete creations with this intense semi-gloss impregnation, ideal for strengthening and enhancing your DIY surfaces.
Raysin 200 powder can be used to create a container for candles. You'll need to apply this protective varnish before you can safely pour and burn your candles. With this varnish, the candle can be poured directly into the Raysin container. Once dry, this varnish remains stable up to 150°C.
Product Details: :
- Water-based
- For indoor and outdoor use
- With a semi-gloss finish that slightly intensifies color
- Conditionally breathable
- Water-repellent
- Highly resistant to soiling
- Suitable for food contact
- Oil-repellent
- UV-resistant
- Thermally stable after drying up to +150°C
- Free from microplastic, PFAS, PFOA/PFOS, SVHC (substance of very high concern)
Recommendations for use:
- Surface must be dry, absorbent, clean, frost-free and flat.
- Apply generously by brush, roller or spray, 2 coats if necessary
- After application, keep surface frost-free and allow to dry for at least 24 hours.
- Longevity depends on many factors: e.g. exposure conditions, weather parameters, application, use, cleaning procedures, etc., and is normally between 2 and 10 years.
If a reduction in the protective effect is noted, we recommend cleaning the surface in question and then applying a new coat. - Pre-testing is recommended
- Do not apply at temperatures below +10°C
- Not suitable for polished surfaces
- Conditionally suitable for coated surfaces (painted, varnished, stamped, gilded, etc.), pre-testing is recommended
Details:
Capacity: 250 ml
Sold per 1 piece
