Art clay Silver is composed of very fine silver powder, an organic binder and water.
Once dry, the shaped object can be fused with heat (650°C), removing the water and binder, leaving 99.9% pure silver.
The silver object can then be polished.
We advise you to create simple models at first, with a little practice, then let your imagination run wild...
Tip: It's important to add water as you work with Art Clay Silver (ACS) because it dries very quickly.
Once dry, it becomes as hard as plaster and can be worked with file, cutter...
The new Art Clay Silver formula combines the best features of the Art Clay family in a single product.
Easier to shape than "Original" and "Serie 650" products
Remains malleable longer than "Original", "Serie 650" and "Slow Dry" products
Shrinkage reduced to 8-9%.
Drying time similar to "Original" and "Art Clay Silver 650" (hair dryer)
Easy to file, engrave and sculpt
Dried clay fragments are easy to recondition thanks to excellent moisture absorption
Optimum finish and gloss quality
Kiln-firing:
1. Heat from room temperature up to 500°C (932°F) → 30 min. bearing
2. Raise to 870 °C (1598 °F) → 60 min step.
3. Turn off the oven and allow to cool to 200°C (392°F) before opening.
Total time approx. 3h depending on oven
Cooking with a blowtorch:
1. Place the piece on a refractory brick.
2. Direct the flame until the piece turns orange.
3. Maintain this color for 2-3 minutes.
Important tips
Always allow the piece to dry thoroughly before firing (otherwise it will crack).
Allow a minimum thickness of 1 mm (1.5-2 mm for rings).
After firing, the piece is 99.9% pure silver and can be polished, burnished, hammered, etc.
Packaging : 20 gr
