Art clay Silver liquid clay.
Used for :
Gluing together 2 previously dried pieces.
Repairing cracks in pieces created with Art Clay Silver (ACS).
Draw reliefs on ACS bases.
Directly cover natural leaves or other surfaces to obtain an imprint and make a replica.
Packaging: 10 g
The new Art Clay Silver formula combines the best features of the Art Clay family in a single product.
Easier to model than "Original" and "Serie 650" products
Remains malleable longer than "Original", "Serie 650" and "Slow Dry" products
Shrinkage reduced to 8-9%.
Drying time similar to "Original" and "Art Clay Silver 650" products (hair dryer)
Easy to file, engrave and sculpt
Dried clay fragments are easy to recondition thanks to excellent moisture absorption
Optimal finish and gloss quality
If the product hardens, simply add a drop of water and let it rest with the lid closed for 1-2 days and check again.
Oven baking:
1. Heat from room temperature up to 500°C (932°F) → 30 min bearing.
2. Raise to 870 °C (1598 °F) → 60 min step.
3. Turn off the oven and allow to cool to 200°C (392°F) before opening.
Total time approx. 3h depending on oven
Cooking with a blowtorch:
1. Place the piece on a refractory brick.
2. Direct the flame until the piece turns orange.
3. Maintain this color for 2-3 minutes.
Important tips
Always allow the piece to dry thoroughly before firing (otherwise it will crack).
Allow a minimum thickness of 1 mm (1.5-2 mm for rings).
After firing, the piece is 99.9% pure silver and can be polished, burnished, hammered, etc.
