This highly versatile and extremely powerful two-component epoxy resin adhesive is specially designed for bonding PureCrystal crystal components.
How to use this PureCrystal adhesive?
The surfaces to be bonded must be clean, dry and free of grease.
1 - Place the components in equal parts in a mixing container.
2 - Mix the two components well.
3 - Apply an appropriate amount to the two surfaces to be bonded with a spatula, bring together and press lightly against each other.
Curing times and final set depend on the ambient temperature.
Heat can reduce the curing time.
Note:
For a clean, smudge-free result, remove any excess glue with a dry cloth before it sets.
When you have finished your activity, remember to close the tubes tightly and store them in a cool, dry place.
Do not use at room temperature below 10°C.
TECHNICAL DATA :
Mixing ratio (A:B) by volume: 100:100
Mixing ratio (A:B) by weight: 100:86
Shelf life at room temperature (23°C / 73.4°F)
Quantity applied 1g : 15min
Total setting time at room temperature (23°C / 73.4°F): 24h
Total setting time in oven (40°C / 104°F): 12h
Total setting time in oven (80°C / 176°F): 2h
Total setting time in oven (100°C / 212°F): 1h
Handling time at room temperature (23°C / 73.4°F): 3h
Viscosity (after mixing): 20 000 +/- 5 000 mPa * s.
Details :
A - Epoxy resin
B - Hardener
Sold with 2 plastic pushers
